QM BEARINGS (TIMKEN) QVP16V300ST
OUTRAS MARCAS
QM BEARINGS (TIMKEN)
QM BEARINGS (TIMKEN) QVP16V300ST
QVP16V300ST PART NUMBER
Pillow Block Roller Bearing Unit - 3.0000 in Bore Dia., Two-Bolt Base, Solid Pillow Block, Cast Steel Material, Non-Expansion Bearing (Fixed)
QTY QUOTEQM BEARINGS (TIMKEN) - QM BEARINGS (TIMKEN) QVP16V300ST
Patented V-Lock® mechanism evenly distributes force on the shaft, helping eliminate fretting corrosion
Maximum holding power and prevention of overtightening
Reliable mechanical withdraw
Preset spherical inner ring radial internal clearances (feeler gauges not required)
Quick installation (typically 10 minutes or less)
Works well with high-speed applications where shaft centering is an issue
Labrynith non-contacting, non-purging seal with DuPont™ Teflon® is used in high-speed applications, superior in dirty and wet conditions, able to operate at high temperatures, resistant to most chemicals and abrasion-resistant
SPECIFICATIONS
| Bore Diameter | 3 in |
|---|---|
| Finish/Coating | Powder Coat |
| Overall Length | 11.63 in |
| Overall Width | 3.59 in |
| Overall Height | 6.47 in |
| Seal Type | Labyrnith non-contacting, non-purging seal with DuPont? Teflon® |
| Mounting | Two-Bolt Base |
| Radial Dynamic Load Capacity | 57200 lbs |
| Bearing Type | Spherical Roller |
| Radial Static Load Capacity | 62500 lbs |
| Bore Type | Round |
| Base Height | 1.38 in |
| Housing Construction | Solid Pillow Block |
| Lubrication Type | Lubrication Fitting |
| Base To Bore Centerline | 3.125 in |
| End Type | Open |
| Duty Type | Heavy Duty |
| Bolt Size | 0.75 in |
| Housing Material | Cast Steel |
| Series | QVP |
| Locking Device | Single V-Lock Collar |
| Weight | 28 lbs |
| Bearing Material | Bearing Steel |
| Manufacturer Product Page | https://cad.timken.com/item/-roller-bearing-solid-block-housed-units-2/single-v-lock-four-bolt-pillow-block/qvpr16v300s-5 |
| Bolt Center-To-Center Length | 8.755 in |
| Manufacturer Catalog | http://cad.timken.com/category/-roller-bearing-solid-block-housed-units-2 |
| Base Width | 3 in |
| Manufacturer Upc Number | 883450111058 |
| Expansion Type | Non-Expansion Bearing (Fixed) |
