CHAR-LYNN (EATON) 129-0311-002
CHAR-LYNN (EATON)
CHAR-LYNN (EATON) 129-0311-002
129-0311-002 PART NUMBER
Hydraulic Geroler Spool Valve Motor - J-Series, 0.50 in³/r, 5-Bolt - 1.239 in Pilot
QTY QUOTECHAR-LYNN (EATON) - CHAR-LYNN (EATON) 129-0311-002
Constant clearance Geroler set
Integrated check valves
Self-lubricating shaft bushing
High-strength rigid components
Increased valve seal lands
High pressure seals
Variety of displacements, shafts, mounts and special options
SPECIFICATIONS
| Series | J-Series |
|---|---|
| Peak Torque | 193 in-lbs |
| Displacement | 0.50 in³/r |
| Replacement Buna Seal Kit - Sold Separately | 002 Design - 60580-000 |
| Maximum Rpm-Continuous | 1992 rpm |
| Replacement Bearing Race - Sold Separately | 002 Design - 16241-C1220 |
| Continuous Torque | 141 in-lbs |
| Replacement Needle Thrust Bearing | 002 Design - 16241-1220 |
| Continuous Pressure | 2030 psi |
| Replacement Output Shaft - Sold Separately | 002 Design - 201354-006 |
| Continuous Flow Rate | 4.5 gpm |
| Replacement Geroler - Sold Separately | 002 Design - 201404-001 |
| Motor Port Type | Metric Threaded O-Ring |
| Replacement Drive - Sold Separately | 002 Design - 23017-001 |
| Motor Port Size | M14 x 1.5 |
| Replacement Drive Spool - Sold Separately | 002 Design - 23016-001 |
| Shaft Type | Splined |
| Replacement Short Cap Screw (Mounting End) - Sold Separately | 002 Design - 16148-422 - 5 Required |
| Output Shaft Size | 16.5 mm Spline B17 X 14 Din 5482 |
| Replacement Housing, Bearing Side (Front) - Sold Separately | 002 Design 201334-002 |
| Mounting Type | 5-Bolt - 1.239 in Pilot |
| Replacement Rear Housing - Sold Separately | 002 Design - 201333-019 |
| Seal Type | Standard |
| Replacement Mounting Flange - Sold Separately | 002 Design - 2 Bolt Kit 60553 |
| Case Drain | No Case Drain |
| Weight | 4.4 lbs |
| Inlet And Outlet Port Size | Metric Threaded O-ring - M14 X 1-1/2 6H Port Size |
| Recommended Fluids | Premium Quality, Anti-Wear Type Hydraulic Oil with A Viscosity Of Not Less Than 701 Sus or 13Cst with Best Range Of 100 - 200 Sus or 20 - 43 Cst At Operating Temperature, |
| Actual Port Type | M14 X 1.5-6H Metric O-ring Port, End Ported |
| Recommended Filtration | Per Iso Cleanliness Code. Level 18/13 |
| Actual Output Shaft | Dia 16.5 [.650] B17 X 14 Din 5482 Spline With M6 X 1 Threaded Hole |
| Repair Manual# | 7-144 |
| Actual Mounting Flange | 5 Bolt: Dia 31.47 [1.239] X 5.1 [.20] Pilot M6 X 1 Mounting |
| Repair Parts Drawing# | 6-01-147 |
| Maximum Operating Temperature | 180 °F |
| Manufacturer Product Page | http://www.eatonpowersource.com/products/configure/motors/details/129-0311-002/ |
| Intermittent Flow Rate | 5.5 gpm |
| Intermittent Pressure | 2400 psi |
| Peak Pressure | 3190 psi |
| Intermittent Torque | 164 in-lbs |
