PQ1203S | POWER TEAM (SPX) PQ1203S | 331602| POWER TEAM (SPX)

POWER TEAM (SPX) PQ1203S

PQ1203S PART NUMBER

PQ120 Heavy Duty Electric Pump - Single-Acting, 3 hp, 5.70 gal Reservoir, 1250.0 in³ Usable Capacity, 120 in³/min Flow at Max psi, 460 V, 60 Hz

QTY QUOTE

POWER TEAM (SPX) - POWER TEAM (SPX) PQ1203S

Designed specifically for heavy duty, extended cycle operations—up to 400 tons

Start and operate under full load, even with voltage reduced 10 %

Electrical shut-down feature prevents unintentional restarting of motor following an electrical service interruption

Internal relief valve limits pressure to 10,000 psi. External relief valve is adjustable from 1,000 to 10,000 psi

Pump prewired at factory with a 3hp, 460 volt, 60 Hz. 3 Phase motor with thermal overload protection—motor starter and heater element supplied as standard equipment

24 volt control circuits on units with remote controls for added user/operator safety

Metal shroud keeps dirt and moisture out of motor and electrical components

Pumps operate below maximum OSHA noise limitation

Pump Type	PQ120 Heavy Duty Electric Pump
Reservoir Capacity (Cubic Inches)	1316.7 in³
For Use With	Single-Acting Cylinders
Usable Oil Capacity	1250 in³
Power Rating	3 hp
Typical Flow At Max Psi	120 in³/min
Voltage	460 V
Typical Flow At 10000 Psi	120 in³/min
Frequency	60 Hz
Typical Flow At 5000 Psi	130 in³/min
Amperage	10.5 A
Typical Flow At 1000 Psi	160 in³/min
Motor Phase	3 ph
Typical Flow At 100 Psi	730 in³/min
Max Amp Draw @ 10000 Psi	10.5 @ 230 , 5.3 @ 460 A, A, V
Maximum Pressure	10000 psi
Max Rpm	1725 rpm
Sound Level At Idle/10000 Psi	73/78 dB(a)
Valve Part Number	9599
Overall Length	15.5 in
Valve Type	3-Way, 3-Position (Pilot Operated) Solenoid Valve w/ Posi-Check®
Overall Width	14.25 in
Valve Type/Function	3-Way, -Position / Advance Hold Return
Overall Height	25.125 in
Valve Function Details	?Advance,? ?hold? and ?return? positions. When in ?advance,? solenoid ?B? is energized and oil goes from pump to cylinder through pressure port. In ?return? position, solenoid ?A? is energized and oil is directed from cylinder and pump to reservoir. With both solenoids de-energized, in ?hold? position, oil from pump is directed back to reservoir while oil is checked in cylinder. The Posi-Check® feature holds load when shifting from ?advance? to ?hold? position.
Weight	180 lbs
Control Switch	Run/Off/Pulse
Manufacturer Product Page	http://www.spxflow.com/en/power-team/pd-pq120-electric/
Reservoir Capacity	5.7 gal

Pump Type

PQ120 Heavy Duty Electric Pump

Reservoir Capacity (Cubic Inches)

1316.7 in³

For Use With

Single-Acting Cylinders

Usable Oil Capacity

1250 in³

Power Rating

3 hp

Typical Flow At Max Psi

120 in³/min

Voltage

460 V

Typical Flow At 10000 Psi

120 in³/min

Frequency

60 Hz

Typical Flow At 5000 Psi

130 in³/min

Amperage

10.5 A

Typical Flow At 1000 Psi

160 in³/min

Motor Phase

3 ph

Typical Flow At 100 Psi

730 in³/min

Max Amp Draw @ 10000 Psi

10.5 @ 230 , 5.3 @ 460 A, A, V

Maximum Pressure

10000 psi

Max Rpm

1725 rpm

Sound Level At Idle/10000 Psi

73/78 dB(a)

Valve Part Number

9599

Overall Length

15.5 in

Valve Type

3-Way, 3-Position (Pilot Operated) Solenoid Valve w/ Posi-Check®

Overall Width

14.25 in

Valve Type/Function

3-Way, -Position / Advance Hold Return

Overall Height

25.125 in

Valve Function Details

?Advance,? ?hold? and ?return? positions. When in ?advance,? solenoid ?B? is energized and oil goes from pump to cylinder through pressure port. In ?return? position, solenoid ?A? is energized and oil is directed from cylinder and pump to reservoir. With both solenoids de-energized, in ?hold? position, oil from pump is directed back to reservoir while oil is checked in cylinder. The Posi-Check® feature holds load when shifting from ?advance? to ?hold? position.

Weight

180 lbs

Control Switch

Run/Off/Pulse

Manufacturer Product Page

http://www.spxflow.com/en/power-team/pd-pq120-electric/

Reservoir Capacity

5.7 gal