AMERICAN CONTROL ELECTRONICS DCR300-30-CYC
AMERICAN CONTROL ELECTRONICS
AMERICAN CONTROL ELECTRONICS DCR300-30-CYC
DCR300-30-CYC PART NUMBER
DC Drive - 1/3 hp, 12/24 V dc Input, dc, 12/24 V dc Output, Regenerative, IP-00 Rated, Chassis
QTY QUOTEAMERICAN CONTROL ELECTRONICS - AMERICAN CONTROL ELECTRONICS DCR300-30-CYC
Modified standard drive allows for cycling between limit switches
Ideal for battery powered equipment
Maintains both set and/or variable speed even as battery voltage declines, extends total running time of equipment
Microprocessor-based design allows custom programming for OEMs
Combines a custom regen-capable switching power supply with low voltage drive
True low voltage output allows control over low voltage motors without the negative effects of current spikes or a large BUS voltage associated with typical 115/230VAC SCR and PWM controls
Regenerative/4-Quadrant drives have the ability to perform quick and contactorless braking and/or reversing-on-the-fly
Isolated logic allows floating or grounded 0 to 5VDC or 0 to 10VDC signals
Forward and reverse inhibits can be set for NO or NC to brake to a stop, can be used for rapid starting and stopping
Diagnostic LEDs: Power, current limit
1.05 form factor
1% base speed regulation
80:1 speed range
Trim pots: Forward and reverse maximum speed, forward and reverse acceleration, forward and reverse current limit, forward and reverse dwell
SPECIFICATIONS
| Horsepower | 1/3 hp |
|---|---|
| Max Horsepower | 1/3 hp |
| Drive Input Voltage | 12/24 V dc |
| Max Current | 15 A |
| Drive Input Phase | dc |
| Continuous Current | 15 A |
| Drive Output Voltage | 12/24 V dc |
| Peak Current | 30 A |
| Drive Type | Regenerative |
| Ambient Temperature Range | 32 to 131 °F |
| Enclosure Rating | IP-00 |
| Brake Type | Regenerative |
| Function Of Controller | Forward/Stop/Reverse |
| Braking | Yes |
| Enclosure Type | Chassis |
| Manufacturer Product Page | https://www.americancontrolelectronics.com/p-289-dcr300-30-cyc.aspx |
| Min Horsepower | 1/50 hp |
