AMERICAN CONTROL ELECTRONICS MUN100-10
AMERICAN CONTROL ELECTRONICS
AMERICAN CONTROL ELECTRONICS MUN100-10
MUN100-10 PART NUMBER
DC Drive - 1 hp, 115 V ac Input, 1 ph, 90 V dc Output, Non-Regenerative, IP-00 Rated, 50/60 Hz, Chassis
QTY QUOTEAMERICAN CONTROL ELECTRONICS - AMERICAN CONTROL ELECTRONICS MUN100-10
Traditional ACE mounting pattern with smaller footprint uses minimal space
Microprocessor-based design allows custom programming for OEMs
Stopping Modes: Inhibit (NO) for coasting to a stop, can be used for rapid starting and stopping
Designed for cost savings in large quantities for OEMs
1.37 form factor
1% base speed regulation
60:1 speed range
Trim pots: Maximum speed, minimum speed, acceleration/deceleration, current limit, IR compensation
SPECIFICATIONS
| Horsepower | 1 hp |
|---|---|
| Max Horsepower | 1 hp |
| Drive Input Voltage | 115 V ac |
| Max Current | 10 A |
| Drive Input Phase | 1 ph |
| Continuous Current | 10 A |
| Drive Output Voltage | 90 V dc |
| Peak Current | 10 A |
| Drive Type | Non-Regenerative |
| Ambient Temperature Range | 50 to 131 °F |
| Enclosure Rating | IP-00 |
| Brake Type | None |
| Function Of Controller | Run/Stop |
| Braking | No |
| Frequency Rating | 50/60 Hz |
| Manufacturer Product Page | https://www.americancontrolelectronics.com/p-236-mun100-10.aspx |
| Enclosure Type | Chassis |
| Min Horsepower | 1/20 hp |
