AMERICAN CONTROL ELECTRONICS PWM400-10
AMERICAN CONTROL ELECTRONICS
AMERICAN CONTROL ELECTRONICS PWM400-10
PWM400-10 PART NUMBER
DC Drive - 2 hp, 115/230 V ac Input, 1 ph, 130/240 V dc Output, Non-Regenerative, IP-00 Rated, 50/60 Hz, Chassis
QTY QUOTEAMERICAN CONTROL ELECTRONICS - AMERICAN CONTROL ELECTRONICS PWM400-10
Traditional ACE mounting pattern and footprint
Accepts AC or DC input in the 115–230V range with no switches to set
Inhibit (NO) for coasting to a stop, can be used for rapid starting and stopping
Diagnostic LEDs: Power, current limit
1.05 form factor
1% base speed regulation
100:1 speed range
Trim pots: Maximum speed, minimum speed, acceleration/deceleration, current limit, IR compensation
SPECIFICATIONS
| Horsepower | 2 hp |
|---|---|
| Max Current | 10 A |
| Drive Input Voltage | 115/230 V ac |
| Continuous Current | 10 A |
| Drive Input Phase | 1 ph |
| Peak Current | 10 A |
| Drive Output Voltage | 130/240 V dc |
| Ambient Temperature Range | 50 to 104 °F |
| Drive Type | Non-Regenerative |
| Brake Type | None |
| Enclosure Rating | IP-00 |
| Braking | No |
| Function Of Controller | Run/Stop |
| Standards Met | UL Recognized, CSA |
| Frequency Rating | 50/60 Hz |
| Manufacturer Product Page | https://www.americancontrolelectronics.com/p-45-pwm400-10.aspx |
| Enclosure Type | Chassis |
| Min Horsepower | 1/4 hp |
| Max Horsepower | 2 hp |
