NICE BALL BEARINGS (RBC BEARINGS) N6910TNTG18
OUTRAS MARCAS
NICE BALL BEARINGS (RBC BEARINGS)
NICE BALL BEARINGS (RBC BEARINGS) N6910TNTG18
N6910TNTG18 PART NUMBER
N 6910 TN BRG (OLD 6910J)
MFR
Nice® Flange-Mount Ball Bearing Unit - Two-Bolt Flange, 0.6250 in Bore, Pressed Steel Housing, Set Screw Locking, Contact Seal
QTY QUOTENICE BALL BEARINGS (RBC BEARINGS) - NICE BALL BEARINGS (RBC BEARINGS) N6910TNTG18
Bearing manufactured with flanged housing to aid in installation
Pregreased with metered Shell Alvania #2 grease
Suitable for medium loads and moderate speeds
Extended inner ring with 2 set screws for securing a shaft
Although not the self-aligning type, this bearing will accommodate a limited amount of angular misalignment
SPECIFICATIONS
| Bore Diameter | 0.625 in |
|---|---|
| End Type | Sealed |
| Bolt Center-To-Center Length | 2.875 in |
| Operating Temperature Range | Maximum of +250 °F |
| Overall Length/Diameter | 3.75 in |
| Maximum Operating Temperature | 300 ºF |
| Overall Height | 1.875 in |
| Finish/Coating | Chrome Steel |
| Bore Type | Round |
| Bolt Size | 0.4375 in |
| Mounting Type | Two-Bolt Flange |
| Maximum Rpm | 3000 rpm |
| Housing Material | Pressed Steel |
| Lubrication Type | Non-Relubricable |
| Locking Device | Set Screw |
| Series | 6900 |
| Expansion Type | Non-Expansion Bearing (Fixed) |
| Application | Textile Machinery, Agricultural Machinery, idlers, pulleys, Material Handling Equipment |
| Housing Width | 1.875 in |
| Replacement Bearing | N6910BTNTG18 |
| Inner Ring Width | 1 in |
| Insert Material | 52100 Bearing Quality Steel |
| Radial Dynamic Load Capacity | 1610 lb |
| Manufacturer Upc Number | 637400291082 |
| Radial Static Load Capacity | 1010 lb |
| Weight | 0.32 lbs |
| Seal Type | Contact Seal |
