On request
MORSE
Call
MORSE 300Q56L15
#300Q56L15
On request
XH1124
Manufacturer descriptionRaider Plus® XH1124 Right Angle Worm Gear Speed Reducer - Single Reduction, 15:1 Ratio, 3.00 in Center Distance, C-Face Quill, 0.6250 in Input Size, Left Hand Output, 56C Frame
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
MORSE — MORSE 300Q56L15
- Rugged Cast-Iron Housing: Provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds Tapered roller bearings are used on output shaft
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear
- All Units Filled with Polyglycol Oil
Specifications
| Brand | MORSE |
| Category | RIGHT ANGLE WORM GEAR SPEED REDUCERS |
| Reduction | Single |
| Housing material | Cast Iron |
| Center distance | 3 in |
| Seal material | Viton |
| Maximum input horsepower | 4.840 @ 1750 rpm_x000D_ hp |
| Overhung load capacity | 2549 lbs |
| Standard base kit | XH9000 |
| Output direction | Left Hand |
| Vertical low base kit | XH9002 |
| Manufacturer reducer size | 300 |
| Vertical high base kit | XH9003 |
| Input type | C-Face Quill |
| Vertical j base kit | XH9004 |
| Input size | 0.625 in |
| Hollow output flange kit | XH9001 |
| Output type | Solid Shaft |
| Torque arm kit | XH9009 |
| Output size | 1.25 in |
| Riser block kit | XH9201 |
| Nema / iec frame size | 56C |
| Input torque | 174.3100 in-lbs @1750 input rpm 1 HP |
| Cad drawing | https://www.3dcontentcentral.com/PremiumSSS-Download-Model.aspx?catalogId=12261&id=4097 |
| Maximum output rpm | 116.67 rpm |
| Manufacturer upc number | 662000000000 |
| Maximum output torque | 116.67 in-lbs @1750 input rpm |
| Weight | 68 lbs |
Related products
Illustrative image
Illustrative image
Illustrative image