On request
MORSE
Call
MORSE 300Q180R25
#300Q180R25
On request
XH1196
Manufacturer descriptionXH1196 Right Angle Worm Gear Speed Reducer - Single Reduction, 25:1 Ratio, 3.00 in Center Distance, C-Face Quill, 1.1250 in Input Size, Right Hand Output, 182/184TC Frame
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
MORSE — MORSE 300Q180R25
- Rugged Cast-Iron Housing: Provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds Tapered roller bearings are used on output shaft
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear
- All Units Filled with Polyglycol Oil
Specifications
| Brand | MORSE |
| Category | RIGHT ANGLE WORM GEAR SPEED REDUCERS |
| Reduction | Single |
| Housing material | Cast Iron |
| Center distance | 3 in |
| Seal material | Viton |
| Maximum input horsepower | 3.360 @ 1750 rpm_x000D_ hp |
| Overhung load capacity | 2574 lbs |
| Standard base kit | XH9000 |
| Output direction | Right Hand |
| Vertical low base kit | XH9002 |
| Manufacturer reducer size | 300 |
| Vertical high base kit | XH9003 |
| Input type | C-Face Quill |
| Vertical j base kit | XH9004 |
| Input size | 1.125 in |
| Hollow output flange kit | XH9001 |
| Output type | Solid Shaft |
| Torque arm kit | XH9009 |
| Output size | 1.25 in |
| Riser block kit | XH9201 |
| Nema / iec frame size | 182/184TC |
| Input torque | 121.0900 in-lbs @1750 input rpm 1 HP |
| Cad drawing | https://www.3dcontentcentral.com/PremiumSSS-Download-Model.aspx?catalogId=12261&id=4085 |
| Maximum output rpm | 70 rpm |
| Manufacturer upc number | 662000000000 |
| Maximum output torque | 70 in-lbs @1750 input rpm |
| Weight | 68 lbs |
Related products
Illustrative image
Illustrative image
Illustrative image