On request
POWER TEAM (SPX)
Call
POWER TEAM (SPX) PE554PT
#PE554PT
On request
Vanguard® PE55 Electric 2-Speed Pump - Single or Double-Acting, 1-1/8 hp, 2.50 gal Reservoir, 525.0 in³ Usable Capacity, 56 in³/min Flow at Max psi, 110/115 V, 50/60 Hz
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
POWER TEAM (SPX) — POWER TEAM (SPX) PE554PT
- For use with single-acting or double-acting Power Seat, Stressing Jacks ONLY; up to 200 tons
- 1-1/8 hp, 12,000 rpm, 110/115 volt, 50/60 Hz universal motor; draws 25 amps at full load, starts at reduced voltage. CSA rated for intermittent duty
- 10 foot remote motor control (except PE552S which has a 25 foot remote motor and valve control)
- True unloading valve achieves greater pump efficiency, allowing higher flows at maximum
- Reservoirs available in sizes up to 10 gallons
Specifications
| Brand | POWER TEAM (SPX) |
| Category | ELECTRIC HYDRAULIC PUMPS |
| Pump type | PE55 Electric 2-Speed Pump |
| Reservoir capacity (cubic inches) | 577.5 in³ |
| For use with | Single or Double-Acting Cylinder Stressing Jacks w/ Power Seater |
| Usable oil capacity | 525 in³ |
| Power rating | 1-1/8 hp |
| Typical flow at max psi | 56 in³/min |
| Voltage | 110/115 V |
| Typical flow at 10000 psi | 56 in³/min |
| Frequency | 50/60 Hz |
| Typical flow at 5000 psi | 74 in³/min |
| Amperage | 25 A |
| Typical flow at 700 psi | 440 in³/min |
| Motor phase | 1 ph |
| Typical flow at 0 psi | 704 in³/min |
| Max rpm | 12000 rpm |
| Maximum pressure | 10000 psi |
| Valve part number | 9628 |
| Sound level at idle/10000 psi | 90/89 dB(a) |
| Valve type | 4-Way, 3-Position (Tandem Center) Manual, Post-Tensioning Single-Strand Valve |
| Overall length | 14 in |
| Valve type/function | 4-Way, 3-Position / Advance Hold Sequenced Return |
| Overall width | 9.5 in |
| Valve function details | With valve in center position, pump is started. Next the cable is inserted into stressing tool, valve is placed in ?A? position; ?Pull? portion of stressing tool is pressurized to specified level for proper cable tensioning (?A? port is checked internally, can only be released by building pressure in ?B? position). Next the valve is placed in ?B? position, which is pressure controlled and will not exceed 6,400 psi (440 bar); ?Return? portion of stressing tool is pressurized and will release ?A? port when pressure reaches approximately one-half the ?A? port pressure??A? port remains open as long as this pressure differential is maintained. Then the pump is stopped, valve is placed in ?A? position, releasing ?B? port pressure. |
| Overall height | 18.25 in |
| Control switch | Remote Motor |
| Weight | 65 lbs |
| Reservoir capacity | 2.5 gal |
| Manufacturer product page | http://www.spxflow.com/en/power-team/pd-pe55-electric-portable/ |
