On request
RPMBRND
Call
RPMBRND ZA2012
#ZA2012
On request
Pillow Block Roller Bearing Unit - 0.7500 in Bore Dia., Two-Bolt Base, Solid Pillow Block, Cast Iron Material, Non-Expansion Bearing (Fixed)
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
RPMBRND — RPMBRND ZA2012
- Series 2000 collar mounted spherical roller bearing units provide economic and versatile arrangements for supporting shafts that carry substantial radial or combination radial and thrust loads and oscillatory or dynamic conditions
- Aligned by the retainers and the outer races, so despite misalignment, the roller load is always equally distributed across the surface
- This distribution of load, prevents high edge load stresses on the rollers and therefore it is not necessary to derate the bearing for misalignment conditions
- Misalignment capabilities: Total of 3°
- Cast iron housing
Specifications
| Brand | RPMBRND |
| Category | PILLOW BLOCK ROLLER BEARING UNITS |
| Bore diameter | 0.75 in |
| Base width | 2 in |
| Overall length | 5.875 in |
| Expansion type | Non-Expansion Bearing (Fixed) |
| Overall height | 3.0625 in |
| Finish/coating | Powder Coated |
| Mounting | Two-Bolt Base |
| Overall width | 2-9/16 in |
| Bearing type | Spherical Roller |
| Seal type | Clearance/Non-Contact |
| Bore type | Round |
| Radial dynamic load capacity | 9900 lb |
| Housing construction | Solid Pillow Block |
| Radial static load capacity | 9900 lb |
| Base to bore centerline | 1.5625 in |
| Maximum rpm | 6500 RPM |
| Housing material | Cast Iron |
| Lubrication type | Lubrication Fitting |
| Locking device | Concentric Collar |
| Series | 2000 |
| Bolt center-to-center length | 4-3/8 in |
| Standards met | ANSI/ABMA STD 9-1990 |
Related products
Illustrative image
Illustrative image
Illustrative image