On request
RPMBRND
Call
RPMBRND ZA2103
#ZA2103
On request
Pillow Block Roller Bearing Unit - 1.1875 in Bore Dia., Two-Bolt Base, Solid Pillow Block, Cast Iron Material, Non-Expansion Bearing (Fixed)
Price on request — a consultant will confirm lead time and terms.
Need to confirm compatibility?
Talk to a technical consultant
RPMBRND — RPMBRND ZA2103
- Series 2000 collar mounted spherical roller bearing units provide economic and versatile arrangements for supporting shafts that carry substantial radial or combination radial and thrust loads and oscillatory or dynamic conditions
- Aligned by the retainers and the outer races, so despite misalignment, the roller load is always equally distributed across the surface
- This distribution of load, prevents high edge load stresses on the rollers and therefore it is not necessary to derate the bearing for misalignment conditions
- Misalignment capabilities: Total of 3°
- Cast iron housing
Specifications
| Brand | RPMBRND |
| Category | PILLOW BLOCK ROLLER BEARING UNITS |
| Bore diameter | 1.1875 in |
| Base width | 2-1/8 in |
| Overall length | 6.3125 in |
| Expansion type | Non-Expansion Bearing (Fixed) |
| Overall height | 3.4375 in |
| Finish/coating | Powder Coated |
| Mounting | Two-Bolt Base |
| Overall width | 2-11/16 in |
| Bearing type | Spherical Roller |
| Seal type | Clearance/Non-Contact |
| Bore type | Round |
| Radial dynamic load capacity | 14300 lb |
| Housing construction | Solid Pillow Block |
| Radial static load capacity | 14200 lb |
| Base to bore centerline | 1.75 in |
| Maximum rpm | 5750 RPM |
| Duty type | Standard Duty |
| Lubrication type | Lubrication Fitting |
| Housing material | Cast Iron |
| Series | 2000 |
| Locking device | Concentric Collar |
| Standards met | ANSI/ABMA STD 9-1990 |
| Bolt center-to-center length | 4-3/4 in |
Related products
Illustrative image
Illustrative image
Illustrative image